Caving Gear Image

Hangers and Bolts

A very full section because bolting presents a lot of choices! Here you'll find the various sizes and types of hangers for most occasions; and then the bolts which actually anchor the hangers to the rock. Finally you'll find some of our multi-item deals, BUT if you want to buy more significant numbers of anything, contact us directly by e-mail. We're happy to help!

Raumer Ring Hanger 
£4.80

Raumer Ring Hanger

Stainless steel ring hanger. Traditional ring hanger, able to take loads equally well both parallel and perpendicular to the rock. Also made for use without maillons or karabiners as the rope can tie in directly without damage in normal use. The Raumer Ring has the advantage that it takes the standard bolt which can also be used with other Raumer plate hangers. Sold without the bolt to allow the choice of using through bolts instead of spits. Strength 22KN in both alignments.
Amarrage Souple COMPLETE 
£9.42

Amarrage Souple COMPLETE

A very versatile and lighweight hanger, for experts. Consists of a disk of dural,made to fit an 8mm bolt (supplied) and through which may also be threaded a sling of 5mm pure Dyneema (see 'Ropes and Cords') which may be purchased seperately. The Amarrage Souple is meant to be used as part of a light rigging technique, without maillons or karabiners (or at least significantly reducing their use). Their main benefit is light weight (23g) and versatility. They can be used as main hangs, rebelays, and deviations, with a maximum strength of 16KN. These anchors are provided complete with 1m of Pure Dyneema cord. It should be stressed that these are hangers for EXPERT RIGGERS ONLY, as their strength and the variety of knots required in their use clearly indicates. If you don't already know what these AS hangers are, it is recommended that you consult Alpine Caving Techniques, or the Technical Caving Manual: which are mines of information.
Raumer Rock hanger 10mm 
£3.20

Raumer Rock hanger 10mm

Stainless steel twist hanger for use with M10 bolts; both traditional and through bolts.The Rock is supplied without a bolt, as it is often used with stainless through bolts for strong permanent placements, and customers will choose their own preferred legth of hanger. The Rock is a multi directional hanger made of AISI316L grade stainless. Strength is 27kn, weight 45g without bolt.
Raumer Ring hanger 10mm 
£5.20

Raumer Ring hanger 10mm

Stainless steel ring hanger for use with M10 bolts; both traditional and through bolts.The Ring is supplied without a bolt, as it is often used with stainless through bolts for strong permanent placements, and customers will choose their own preferred length of hanger. This hanger is easily and conveniently used without connectors, the rounded edges working well if ropes are tied in directly. The Ring is a multi directional hanger made of AISI316L grade stainless in 8mm bar. Strength is 27kn in all normal directions, weight 70g without bolt.
Raumer Superstar anchor 
£4.50

Raumer Superstar anchor

Stainless glue in anchor, 10mm by 80mm.Strong and reliable anchor for permanent rigging. As with all anchors, but glue ins especially...YOU MUST GET THE PLACEMENT AND FIXING RIGHT. A good starting place to learn about this is Raumer's own website at www.raumerclimbing.com under their entry for this kit. If you get it right...strength is 35KN under all normal loads
Raumer Minox hanger, Set of Ten 
£22.00

Raumer Minox hanger, Set of Ten

Ten of the following: Raumer Minox hanger. Stainless steel twist hanger for use with M8 bolts. For use with karabiners, this hanger can be used in Y hangs to hold rope clear of the rock, to create free hangs. Supplied without a bolt, to allow the user to choose between spit type placements and through bolts (both can be purchased separately). Strength 22KN, applied either parallel and perpendicular to the rock.
Raumer Wing hanger, Set of Ten 
£22.00

Raumer Wing hanger, Set of Ten

Ten of these, all packaged up: Raumer Wing hanger. Stainless steel simple bend hanger for use with M8 bolts. For use with maillons or karabiners this hangers is particularly suitable for traverse lines and rebelays. Used with a karabiner, it helps keep the knot clear of the rock below the bolt placement, and also facilitates clipping of cowstails into the karabiner. Supplied wihout bolts to allow the user to choose between spit placements and through bolts. Strength 22KN (up to 40' from parallel to the rock)
Petzl Vrillee hanger, Set of Ten 
£35.10

Petzl Vrillee hanger, Set of Ten

Ten of the following: Petzl Vrillee twist alloy anchor. A lightweight hanger for use where reducing load is the greatest consideration. Accepts loads off vertical, and therefore suited for Y hangs off opposing walls, and medium angled deviations. Only supplied with M8 bolts. Breaking strength 15KN. Weight 32g (each, clearly).
Raumer M8 Stainless Bolts, Set of ten 
£9.90

Raumer M8 Stainless Bolts, Set of ten

A pack of ten Raumer stainless steel M8 bolts. For use with Raumer Minox, Ring and Wing hangers, and other similar hangers from other companies such as Kong. Comes complete with washer to hold it in place. Could make your weekend!



Greencroft,Hospital Road,Scorton,Richmond, North Yorkshire. DL10 6DT

VAT NO : 944 5403 23

Copyright © 2018 Starless River  :   Web Development by ClearRight

WE USE COOKIES!

Accept and Close

More Information